# Connect Amazon to Starshipit
URL: https://support.starshipit.com/articles/206090475-connect-amazon-to-starshipit
Canonical: https://support.starshipit.com/articles/206090475-connect-amazon-to-starshipit
Markdown: https://support.starshipit.com/articles/206090475-connect-amazon-to-starshipit.md
Updated: 2026-07-21

> For the complete documentation index, see [llms.txt](https://support.starshipit.com/llms.txt).

> Integrate your Amazon stores with Starshipit to import orders and automatically write back tracking information.

Starshipit currently supports the below marketplaces. If a country you wish to set up in Starshipit is not listed, please raise a feature request with our support tean [here](https://help.starshipit.com). The full list of current Amazon marketplaces can be found [here](http://docs.developer.amazonservices.com/en_US/dev_guide/DG_Endpoints.html).

|  |  |  |  |
| --- | --- | --- | --- |
| Australia | France | Netherlands | Sweden |
| Brazil | Germany | Poland | Turkey |
| Canada | India | Saudi Arabia | United Arab Emirates |
| Egypt | Italy | Singapore | United Kingdom |
| Japan | Mexico | Spain | United States |

## What you need to get started

* The Amazon Marketplace you are integrating with
* Your Amazon username and password

## How to set up Amazon SP-API
* You can integrate as many Amazon Marketplaces into your Starshipit account as you like.
* Starshipit integrates with Amazon MWS and Amazon SP-API. Amazon MWS will be deprecated at the end of July 2022. We recommend all users set up Amazon SP-API.
* Starshipit supports Amazon FBA & FBM in Australia and United Kingdom.

1. Go to **Settings** > **Integrations** > **Add a new integration** > **Amazon**.
2. Tick **Enable Amazon**.
3. Select **Amazon Selling Partner API** as the API type.
4. Select the Market Place from the Amazon Market Place drop down.
5. Click **Authorise**, this will redirect you to Amazon to log in.
6. Provide Starshipit access to your Amazon store.
7. Once done, you will be redirected back to Starshipit and the integration will be good to go.

## Additional Configuration

**Status to import**: Use this option to select what status orders should be in to import into Starshipit

### Import only Amazon Self Ship orders

Amazon Easy Ship orders are imported by default. If you only fulfil Amazon Self Ship orders through Starshipit:

1. Go to **Settings > Integrations > Amazon**.
2. Turn off **Import Amazon Easy Ship orders**.
3. Click **Save**.

Starshipit will continue importing Amazon Self Ship orders and skip Amazon Easy Ship orders.

## (LEGACY) How to set up Amazon MWS

### Add Amazon MWS Developer Permission

:::warning
These instructions only work if you have aSeller Central Professionalaccount.
:::

1. Log into your Amazon seller central account.
2. Hover over **Settings** in the very top right then click **User Permissions**from the dropdown.
3. Scroll to Amazon MWS Developer Permissions and click on the **Visit Manage Your Apps** button.
4. Click on the **Authorize New Developer** button.
5. For Developer's Name enter **Starshipit**.
6. For Developer ID enter one of the following options:
   * Use **1817-8885-3340** for Amazon **Australia/Singapore/Japan** Marketplace
   * Use **4642-1105-5661** for Amazon **Americas** Marketplace
   * Use **0305-7714-1617** for Amazon **UK/Europe/Middle East** Marketplace.
7. Click on the **Next** button.  
   ![mceclip0.png](/uploads/articles/integrations/ecommerce-platforms/amazon-integration/image_360006854455.png)
8. Click on the **Next** button to confirm access.  
   ![mceclip2.png](/uploads/articles/integrations/ecommerce-platforms/amazon-integration/image_360006854475.png)

:::note
Please note down your Seller IDand MWS Auth Tokenfor the next step.
:::

### Set up Amazon integration in Starshipit

1. Log into **Starshipit**.
2. Click **Settings** in the very bottom left then select **Integrations**.
3. Click **Add a new integration** and select **Amazon**.
4. Tick the **Enable Amazon** tick box.
5. Enter your **Seller ID.**
6. Enter your **MWS Auth Token**.
7. Select your Amazon Marketplace.
8. Set your **Status to Import**.
9. Click on the **Save** button.

## Configure Amazon settings

Complete these settings during Amazon setup. You can update them later from **Settings > Integrations > Amazon**. The available controls depend on whether you use Selling Partner API (SP-API) or the legacy MWS connection.

| Setting | What it controls |
| --- | --- |
| **Enable Amazon** | Turns this Amazon connection on or off. |
| **API type** | Selects **Amazon Selling Partner API** or legacy **MWS**. New connections use SP-API. |
| **Marketplace** | Selects the Amazon marketplace that supplies orders for this connection. |
| **Seller ID** | Identifies your Amazon seller account. For SP-API, this value is populated during authorisation; for MWS, enter the Seller ID from Amazon. |
| **MWS Auth Token** | Authenticates a legacy MWS connection. This field appears only when MWS is selected. |
| **Status to import** | Limits imports to the selected Amazon order statuses. Separate multiple statuses with a semicolon. |
| **Remove batching** | Turns off batching during import. Batching improves import performance, so use this when you are not importing all orders. |
| **Use Amazon Easy Ship** | Enables Easy Ship handling when the selected marketplace supports it. |
| **Import Amazon Easy Ship orders** | Includes Easy Ship orders in imports. Turn this off when you fulfil only Self Ship orders. |
| **Map address line 2 to building** | Maps Amazon address line 2 into Starshipit's Building field; otherwise it is mapped to the suburb field. |

Click **Save** after changing a setting. Use **Authorise** or **Reauthorise** after changing the Amazon authorisation, then use **Test connection** in the Tools tab to verify access.