# Set up Sub60
URL: https://support.starshipit.com/articles/1794182400000-set-up-sub60
Canonical: https://support.starshipit.com/articles/1794182400000-set-up-sub60
Markdown: https://support.starshipit.com/articles/1794182400000-set-up-sub60.md
Updated: 2026-11-09

> For the complete documentation index, see [llms.txt](https://support.starshipit.com/llms.txt).

> Connect Sub60 to Starshipit for New Zealand domestic rates, labels, and tracking.

Connect Sub60 to Starshipit to get rates, create labels, and track New Zealand domestic shipments.

## Before you begin

Make sure you have:

* An active Sub60 account for New Zealand domestic shipping
* The account code, Hub username, and password Sub60 issued for your business
* The service codes enabled on your Sub60 account
* Complete sender and delivery addresses in New Zealand
* The weight and dimensions for each parcel

Each Starshipit account stores its own Sub60 credentials. Contact Sub60 if you need credentials or want to confirm which service codes are enabled for your account.

## Set up Sub60

1. In Starshipit, go to **Settings > Couriers > Add a new courier**.
2. Select **New Zealand** as the shipping-from country.
3. Select **Sub60**.
4. Enable Sub60, then enter your **Account code**, **Username**, and **Password**.
5. Add the service codes enabled on your Sub60 account, then save your settings.

When you edit the settings later, leave **Password** blank to keep the saved password. Enter a new password only if Sub60 has changed it.

## Add Sub60 service codes

The standard service codes are:

| Code | Service |
| --- | --- |
| `S` | Standard |
| `P` | Priority |
| `D` | Direct |
| `E` | Economy |

Under **Product codes**, add the standard services enabled for your account and any other service codes Sub60 has enabled for your business. Use the code and name supplied by Sub60. The rates available for a shipment depend on your account, selected service, addresses, and parcel details.

## Set the pickup delay

If an order does not include a pickup time, Starshipit schedules pickup for the current time plus the **Pickup delay (minutes)** setting. The default is `0`. A pickup time on the order takes precedence over this setting.

## Create labels and track shipments

When you create a Sub60 label, Starshipit sends the booking with the selected service and the details for each parcel. Enter accurate weights and dimensions for every parcel. Sub60 labels are generated in 100 × 150 mm format, and tracking updates appear on the order in Starshipit.

Sub60 automatically adds a Van when an item is over 1.2 m long, and a Transit when it is over 2.6 m long. Enter accurate parcel lengths so Sub60 can apply the appropriate vehicle.

## Verify the setup

1. Open an order with sender and delivery addresses in New Zealand.
2. Check that each parcel has a weight and dimensions.
3. Get rates and confirm that a configured Sub60 service appears.
4. Create the label and check that the PDF and tracking details are saved to the order.

Creating a label sends a booking to Sub60. If the result is unclear, confirm the booking status with Sub60 before trying again.

## Troubleshooting

### No rates are returned

Check that the account code and username are correct, and replace the password if it has changed. Confirm that the service code is enabled on your Sub60 account and that both addresses are in New Zealand. Make sure each parcel has a valid weight and dimensions.

### A label cannot be created

Check that the order has complete sender and delivery addresses, including a street, suburb or city, and postcode. Confirm that every parcel has a valid weight and dimensions, then check the error shown in Starshipit.
