# Print an integrated label and packing slip
URL: https://support.starshipit.com/articles/1793234320005-print-an-integrated-label-and-packing-slip
Canonical: https://support.starshipit.com/articles/1793234320005-print-an-integrated-label-and-packing-slip
Markdown: https://support.starshipit.com/articles/1793234320005-print-an-integrated-label-and-packing-slip.md
Updated: 2026-11-04

> For the complete documentation index, see [llms.txt](https://support.starshipit.com/llms.txt).

> Combine an A4 packing slip and a 100 × 150 mm shipping label. Choose the right template size, enable both printing settings and check stationery fit.

Use **Integrate Shipping Labels onto Packing Slip** to combine the first 100 × 150 mm shipping label with an **A4 packing slip**. This is useful for integrated-label stationery with a peel-off label area.

![Illustration of an A4 packing slip with the item table at the top and a rotated 100 × 150 mm sample shipping label near the bottom of the same sheet](/uploads/articles/packing-slips/integrated-label-a4-example.webp)

Example layout with sample details. Your template and label position can differ; check a plain-paper print against your stationery.

## Before you begin

- Make sure integrated labels are available for your account and you can edit its packing slip settings.
- **Choose an A4 packing slip template.** In **New custom template editor**, choose an A4 **Template size**, such as **A4 portrait**. The **100x150 portrait** option creates a label-sized packing slip and is unsuitable for this combined A4 layout.
- Set your courier's **shipping-label format** to **100 × 150 mm**. This is a separate setting from the packing slip's template size.
- Use an A4 printer and plain A4 paper for your first check. Confirm the generated layout fits your stationery before buying or using integrated-label stock.

You must enable both automatic packing-slip printing and **Integrate Shipping Labels onto Packing Slip**. Enabling automatic printing alone prints the documents together in the workflow, without combining them on one sheet.

## Enable integrated labels

<!-- tabs:start -->

<!-- tab:Classic UI -->

1. Go to **Settings > Packing Slip**.
2. Select **Configure your Packing Slips here** if it is shown.
3. Select an A4 packing slip template, such as **A4 Template** or **Customise your own**.
4. Under **Printing behaviour**, enable **Print packing slips with each label**.
5. Enable **Integrate Shipping Labels onto Packing Slip**.
6. Select **Save**.

<!-- tab:UI 2.0 -->

1. Go to **Settings > [Packing slips](https://next.starshipit.com/settings/packing-slip)**.
2. Under **Packing slips**, select **Classic A4 template** or another A4 template. If you use **New custom template editor**, set **Template size** to an A4 option, such as **A4 portrait**, and use an A4 layout. Keep the courier's shipping-label format at 100 × 150 mm.
3. In the selected template's print settings, enable **Automatically print packing slip with each label**.
4. Enable **Integrate Shipping Labels onto Packing Slip**.
5. Select **Save**.

![UI 2.0 Print settings showing automatic packing-slip printing and the separate integrated-label checkbox](/uploads/articles/packing-slips/integrated-label-print-settings.jpg)

<!-- tabs:end -->

For template selection, customisation and barcode settings, see [Configure packing slips](/articles/360000026636-configure-packing-slips).

## Check the saved settings and printed output

1. Reopen your packing slip settings and confirm both printing options are still enabled.
2. Print the shipping label for an intended shipment to plain A4 paper first. Start with a short packing slip and one shipping label.
3. Check that the shipping label and packing slip appear together. Check the label's position, rotation and scale, and make sure the barcodes and packing slip content are readable.
4. Compare the test print with the peel-off area on your stationery. Check the printer's paper size and scaling before printing on label stock.
5. Check a longer order or any additional-label workflow before printing a batch, and confirm all pages reach the intended printer.

Use [Understand how Starshipit printing works](/articles/90200000000155-understand-how-starshipit-printing-works) if the output goes to the wrong computer or printer.

## Understand the layout and limits

The first supported shipping label can share a page with the packing slip. Longer packing slips, additional shipping labels and other courier documents can require extra pages. A combined document is not a guarantee that every order will fit on one A4 sheet.

The output uses your Starshipit packing slip layout. Check a real generated document before selecting stationery; label placement and orientation must match the peel-off area you intend to use.

## Troubleshooting

- **The packing slip is set to 100x150 portrait:** change its **Template size** to an A4 option and use an A4 layout. Select **Save**, then reopen settings to confirm the size and both printing options saved. Changing the printer's paper size alone does not change a label-sized packing slip into an A4 template.
- **The integrated-label option is missing:** reopen **Settings > Packing slips** and confirm you have selected an A4 template. **Classic A4 template** supports the option in UI 2.0. If it is still missing, [contact Support](/ticket) to check availability for your account.
- **The option is visible but cannot be changed:** ask your account administrator to check your permission to edit packing slip settings.
- **The label and packing slip remain separate:** reopen settings and check that both printing options saved. Confirm the packing slip is A4 and the courier label is 100 × 150 mm. Extra courier documents or an unsuitable label format can prevent the expected combined output; test one shipment and contact Support with the courier and template you used if needed.
- **The output does not fit the peel-off area:** check a plain-paper print against the stationery and review the printer's paper size and scaling. For packing slip layout changes, use the [template editor](/articles/9067623250063-configure-packing-slips-using-the-template-editor). Contact Support if you still need help with the combined layout.

## FAQs

<!-- faq:start -->

<!-- faq:question -->Can I reproduce an existing invoice layout or use any integrated-label paper?<!-- /faq:question -->

The feature combines a shipping label with a Starshipit packing slip. It does not automatically reproduce an uploaded invoice layout or guarantee a particular label position. Test the generated output before choosing label stock.

<!-- faq:end -->

## Related articles

- [Configure packing slips](/articles/360000026636-configure-packing-slips)
- [Configure packing slips using the template editor](/articles/9067623250063-configure-packing-slips-using-the-template-editor)
- [Print a packing slip](/articles/90200000000515-print-a-packing-slip)
