# Pick orders in WMS Mobile
URL: https://support.starshipit.com/articles/14700000000025-pick-orders-in-wms-mobile
Canonical: https://support.starshipit.com/articles/14700000000025-pick-orders-in-wms-mobile
Markdown: https://support.starshipit.com/articles/14700000000025-pick-orders-in-wms-mobile.md
Updated: 2026-11-09

> For the complete documentation index, see [llms.txt](https://support.starshipit.com/llms.txt).

> Pick customer orders on the warehouse floor using the Starshipit WMS mobile app, including standard single-order picking and tote picking for multi-order runs.

Use the mobile app to pick customer orders directly from the warehouse floor — scanning locations and products to confirm picks without returning to a desk.

## How picking works in the app

A few things apply to all pick jobs:

* **Equipment** — picking jobs require a trolley or cart. Your equipment location is set in **Settings > Equipment**.
* **Scanning or manual entry** — depending on your setup, you can scan barcodes to build quantities, use manual +/− buttons, or both.
* **Partial picks** — if you can't complete the full quantity, you can short-pick a line and continue.
* **Report Issue** — if something is wrong at a location (missing stock, wrong item, damaged goods), use **Report Issue** from the pick step. This creates a follow-up cycle count job so the stock can be investigated.

## Standard picking

Use standard picking when you are working on a pick job for one or more orders.

1. Open **Jobs**, then select a pick job from **All jobs** or **My jobs**.
2. Go to the first required location.
3. Scan the **source location barcode** to confirm you are in the right spot.
4. Scan the **product barcode** to build the picked quantity, or use manual quantity buttons.
5. Repeat for each location until all items are done.
6. Bring the picked items to a packing bench and scan or select the bench to confirm staging.

The job is complete once all picked items have been staged and the app shows the completion screen. Open the separately created pack job to continue; picking does not open it automatically.

:::mobile-screenshot
The pick screen shows the order, product image, SKU, quantity, tracking details and expected source location before you confirm where you are.

![A standard pick showing the order, product, batch, expiry and expected pick face](/uploads/articles/starshipit-wms/mobile-app/picking/pick-location.jpg)
:::

:::mobile-screenshot
After confirming the location, scan the product to increment the quantity. Depending on your permissions, the same step may also show manual quantity, issue reporting and reallocation controls.

![The product scan step with quantity, batch, expiry and issue actions](/uploads/articles/starshipit-wms/mobile-app/picking/scan-product.jpg)
:::

## Tote picking

Use tote picking when the job is set up as a tote pick and each order needs its own tote.

Tote picking lets you pick for multiple orders in one warehouse run, sorting items into totes as you go rather than sorting at the bench afterwards.

1. Open the tote pick job in the app.
2. **Assign a tote to each order** — scan each tote barcode and link it to the order it represents.
3. Move through the warehouse by location.
4. At each location, pick the required items and place each into the correct tote.
5. Scan the tote barcode to confirm the item went into the right one.
6. Continue until all items are picked and sorted.

The job is complete when all items are placed and you confirm the tote pick. Orders are then passed to the packing workflow.

## Pick later or complete a partial pick

Use **Pick Later** to move past a line and continue with other items. It does not record a picked quantity or complete the job. To return to skipped lines in an unfinished standard pick, leave the job and reopen it from **My jobs**. The app loads the remaining work again.

If you need to continue the same pick later, leave it unfinished. **Stage & Complete** in a standard pick and **Complete Partial** in a tote pick complete the job using only the quantities already picked. You cannot then use **Pick Later** to resume the completed job.

If the job is already **Completed** after a short pick, follow the [short-pick recovery guidance](/articles/14700000000011-pick-orders-in-wms#recover-after-a-short-pick).

## Next steps

* [Pack and ship orders in WMS Mobile](/articles/14700000000037-pack-and-ship-orders-in-wms-mobile) — open the pack job after staging.
* [Validate batches and expiry dates with GS1 barcodes](/articles/14700000000055-validate-batches-and-expiry-dates-with-gs1-barcodes-in-wms-mobile) — confirm that labelled tracked stock matches the selected WMS allocation.
* [Setting up the mobile app](/articles/14700000000023-set-up-wms-mobile) — scanner config, equipment, and settings.
* [Picking orders (desktop)](/articles/14700000000011-pick-orders-in-wms) — desktop picking and batch workflows.
* [Jobs on mobile](/articles/14700000000030-manage-jobs-in-wms-mobile) — claim, filter, and manage jobs from your device.
