# Pick orders in WMS
URL: https://support.starshipit.com/articles/14700000000011-pick-orders-in-wms
Canonical: https://support.starshipit.com/articles/14700000000011-pick-orders-in-wms
Markdown: https://support.starshipit.com/articles/14700000000011-pick-orders-in-wms.md
Updated: 2026-11-09

> For the complete documentation index, see [llms.txt](https://support.starshipit.com/llms.txt).

> Pick orders in WMS and recover after a short pick by restarting an unshipped order or packing and shipping the quantities picked.

**Picking** is the process of collecting stock from warehouse locations for a released order. Before picking can begin, an order must be released and stock allocated — WMS then creates one or more pick jobs that tell your team exactly what to collect, from which location, and in what quantity.

This guide covers:

* How pick jobs are created and what they contain
* Working single-order pick jobs
* Batch pick jobs (multiple orders in one run)
* Tote-based picking
* Handling short picks and discrepancies
* Mobile picking

See [Orders and allocation](/articles/14700000000010-manage-orders-and-allocation-in-wms) for how to release orders and trigger pick job creation.

## The picking dashboard

The **Picking dashboard** lists all active pick jobs. For each job you can see:

* Job ID or Batch Pick ID
* Type (single order or batch)
* Status (Pending/Ready, In Progress, Completed)
* Number of orders and lines in the job

Pickers select a job, review what is required, and then walk the warehouse to collect items.

Supervisors with permission to assign jobs can select Ready pick jobs and choose the **Assign** bulk action to give them to one user. The picker must be an active WMS user who is available for assignment. Assigned or in-progress jobs can still be selected for packing summaries, but the bulk assignment action applies only to the selected Ready jobs.

## Shared picking interface

All pick types — single order, batch, tote, putaway, replenishment, and kitting — use the same picking interface:

* **Barcode scanning** to confirm picks
* **Serial and split-line support** for products that require unit-level tracking or split quantities
* **Unit of Measure support** — quantities respect any parent/child UoM configuration on the product
* **Scan history** — a log of all scans made during the session
* **+/− buttons** for manual quantity adjustment when scanning is not possible
* **Mark complete** to finish an individual pick line

This consistency means your team works the same way regardless of job type.

If your account requires source-location confirmation, pickers must scan the location before confirming each line. This is useful in warehouses where nearby bins hold similar products or where scan discipline is part of your accuracy process.

## Pick mode and equipment locking

When a picker starts a job, WMS locks that job to the selected pick mode and equipment context. For example, a tote pick must continue as a tote pick, and work assigned to a specific trolley, cart, or set of totes must continue with that same equipment.

A standard pick can use an available **Equipment** location, or a **Tote** location when **Allow totes as standard pick equipment** is enabled. WMS saves the choice before the first scan and restores it when the same job is resumed. Tote-pick mode keeps its separate one-tote-per-order assignment workflow.

Choose the correct mode before opening the execution screen: opening **Begin Standard Pick** or **Begin Tote Pick** can start and claim the job and save its mode. Use **View Details** to review the job first. Leaving and reopening a job does not reset its saved mode or equipment.

## Single-order picking

One pick job corresponds to one order. WMS has already allocated specific stock in specific locations (and batch/serial where applicable).

### Working a single-order pick job

1. Select a job from the **Picking dashboard**.
2. Review the **picking list**:
   * SKU and description
   * Quantity to pick
   * Source location
   * Batch or serial information (if applicable)
3. Walk the warehouse and collect items from each location.
4. Scan or confirm each item as you pick it.
5. Place items into your equipment (trolley, tote) or directly into an order container.
6. Mark the job as **Completed** once all lines are done.

The web pick job keeps the equipment selection, source location, tracking details, quantity controls and overall progress visible while the picker works.

![A standard web pick job showing equipment, source location, batch, expiry and quantity progress](/uploads/articles/starshipit-wms/web/outbound-fulfilment/picking-job.jpg)

As items are picked:

* Allocations update from ALLOCATED to PICKED.
* Stock reduces at the source location.
* Stock moves into the picker's Equipment location (where configured).

If the allocated stock is not suitable but other stock is available, use reallocation to move the pick to a different valid allocation. Reallocation is also available in tote-pick workflows.

### When an item cannot be found

Record only the quantity you physically pick. A **short pick** means you picked less than the quantity required. Confirming completion with a shortage passes the picked quantities to packing; it does not remove the missing quantity from the order or create another pick job for it.

If you are still looking for stock and want to continue the same pick job later, [leave it open or pause it](#leaving-or-pausing-a-pick-job). Investigate missing stock through a stocktake or adjustment as needed.

### Recover after a short pick

Once the pick job is **Completed**, you cannot reopen it to pick the missing items. Check the **order** status on the Orders dashboard, then choose how to fulfil it:

| What you want to do | Next action |
| --- | --- |
| Restart the whole order before anything ships | Use [Undo Release](/articles/14700000000087-hold-wms-orders-or-undo-release#undo-release) on an eligible **Released** order. Return picked stock through any putaway work, then release the order again for a fresh pick. |
| Ship the items already picked and fulfil the rest later | Open the existing pack job and [pack and ship the actual quantities](/articles/14700000000012-pack-and-ship-orders-in-wms#partial-packing). You can continue from the completed pick without creating another pick job first. |

Undo Release restarts the whole order, including items already picked. It is unavailable for **Shipped** or **Partially Shipped** orders. If nothing was picked for an order, check whether it has already returned to **Pending**: tote picks and some batch picks do this automatically, with no pack job for that order.

## Batch picking (multiple orders at once)

**Batch picking** combines items for multiple orders into a single pick job, reducing warehouse travel. The picker walks the warehouse once and collects combined quantities, then the items are sorted to individual orders at the packing bench.

### Create pick batches from selected orders

Use **Orders per batch** to divide a selection into manageable picking runs. You need permission to release the selected orders.

1. Go to **Orders > Pending** and select the orders to release.
2. Select **Create Batch** to open **Create Pick Job**.
3. Leave **Packing Bench** unset, or select **No packing bench** where the selector is shown. Selecting a packing bench uses the separate batch-packing workflow.
4. Enter a positive whole number in **Orders per batch**. For example, 25 selected orders with a size of 10 creates batches of 10, 10 and 5. Leave it blank to keep all selected orders together.
5. Review the batch preview and enter a **Pick Job ID** if your account requires one.
6. Select **Create Pick Batches**, or **Create Pick Job** when the size is blank.
7. Follow the progress notification and open the resulting pick jobs to check their orders.

Zone splitting can create additional pick jobs within each batch. A custom **Pick Job ID** gets numbered suffixes when you create multiple batches.

Keep the **Orders** page open until the run finishes. If you leave or reload it, review order and job statuses before continuing; the page does not retain the run's recovery state after a reload.

For runs with **Orders per batch** set, select **Stop after current batch** to stop before the next batch starts. Successfully released batches stay released. Use **Review remaining orders** for orders that still need attention, or **Check status and retry** when WMS could not confirm a release result. Check the result before releasing those orders again. To return a released order to Pending, use [Undo Release](/articles/14700000000087-hold-wms-orders-or-undo-release#undo-release) where available.

### Working a batch pick job

1. Select the batch job from the **Picking dashboard**. The job shows a **Batch Pick ID**.
2. Use the picking list — which shows combined quantities per SKU and location across all orders — to collect all items in one pass.
3. Place items into totes or compartments labelled per order, or sort at the packing bench.
4. Mark the batch job as **Completed** once all items are picked.

Visual progress bars show completion at both the overall batch level and at the individual order level within the batch.

You can remove or skip individual orders from a batch if needed — for example, if one order is cancelled mid-process.

## Tote picking

Tote picking assigns one tote to each order in a picking run. It is separate from using a tote as equipment for a standard pick.

Before you begin, ask someone with permission to manage settings to turn on **System > Settings > Picking > Pick Jobs > Tote Picking**. It is off by default. See the [picking settings reference](/articles/14700000000031-wms-settings-reference#picking). Prepare an eligible pick job and available tote locations for its orders.

1. Open the **Picking dashboard** and find the job. Use **View Details** if you need to review it before starting.
2. Select **Begin Tote Pick**, or **Continue Tote Pick** for a job already started. If an unlocked job opens with a mode chooser, choose **Begin Tote Pick** there. Opening the tote execution screen can start the job and save its mode.
3. Assign a tote destination to each order.
4. Pick items and place each into the tote assigned to that order.
5. Complete the tote pick transfer to create downstream packing work.

Tote assignment controls are in the tote execution screen, not the read-only job details. If the tote action is missing, check **Tote Picking** and whether the job is already locked to standard mode before creating more work.

WMS tracks tote assignment state on job orders, so a tote remains linked to the right order as the job progresses. Ready-for-pack tote moves can be used when totes need to move cleanly from picking equipment to the packing bench before packing begins.

![A tote pick with one tote assigned to each order and Continue to picking available](/uploads/articles/starshipit-wms/web/outbound-fulfilment/tote-pick-assignments.jpg)

## Stage pick recovery

If a problem occurs during a staged pick (such as a network interruption), you can recover and resume from where you left off rather than starting the job over.

## Partial picking

On the desktop pick screen, **Submit partial pick** records the quantities picked so far and moves you to staging. This is different from confirming **Complete Pick**, which can close the job with unpicked quantities still outstanding and pass the staged stock to packing.

Stage all picked stock before completing a short pick. If you need to return to picking, keep the job open and use **Continue picking** from the staging screen. Once the job is **Completed**, use the [short-pick recovery options](#recover-after-a-short-pick).

## Leaving or pausing a pick job

If you need to leave a pick job before it is finished, WMS prompts you to choose how to handle the job:

* **Leave the job open** — use this when you are stepping away briefly and the job can remain in progress.
* **Pause the job** — enter a reason so supervisors can see why the job is blocked, such as missing stock, equipment changeover, or waiting for manager review.

Use pausing when the issue needs follow-up from another team member. The pause reason helps managers prioritise work and understand why a job is not moving.

## Mobile picking

Pick execution is supported in the **Starshipit WMS mobile app**, including:

* Standard location-first picking with barcode scan and quantity confirmation
* Tote picking with tote destination assignment
* Serial-number scans and split-line handling where required by the product
* Staging picked items to the packing bench

Mobile picking is ideal for floor-based teams who need fast, hands-free execution.

:::important
Completing a pick does not open packing automatically. Once picks are staged, open or claim the separately created pack job in Starshipit WMS Mobile or continue from the WMS packing dashboard.
:::

## Next steps

* [Pick orders with Starshipit WMS Mobile](/articles/14700000000025-pick-orders-in-wms-mobile) — handheld picking for floor-based teams.
* [Packing and shipping orders](/articles/14700000000012-pack-and-ship-orders-in-wms) — how to verify, box and ship picked orders.
* [Expedited fulfilment](/articles/14700000000013-use-pack-now-and-batch-pack-now) — skip picking entirely for urgent orders with Pack Now.
