# Manage orders and allocation in WMS
URL: https://support.starshipit.com/articles/14700000000010-manage-orders-and-allocation-in-wms
Canonical: https://support.starshipit.com/articles/14700000000010-manage-orders-and-allocation-in-wms
Markdown: https://support.starshipit.com/articles/14700000000010-manage-orders-and-allocation-in-wms.md
Updated: 2026-11-15

> For the complete documentation index, see [llms.txt](https://support.starshipit.com/llms.txt).

> Learn how orders flow from Starshipit into WMS, how stock allocation works, and how to release orders for picking and packing.

Most orders flow automatically from your ecommerce store into Starshipit. From there, Starshipit WMS picks them up and makes them ready for your warehouse team to fulfil. You can also create an order manually or import orders from CSV when they do not come from a connected store.

**The order journey:**

1. **Customer places an order** in your ecommerce platform (Shopify, WooCommerce, etc).
2. **Order appears in Starshipit** via your ecommerce integration.
3. **WMS picks up the order automatically** when **Enable WMS integration** and **Send order events to WMS** are both on. It appears in your WMS orders dashboard with status **Pending**.
4. **You release the order** when ready. WMS allocates stock and creates pick jobs for your team.
5. **Your team picks, packs and ships.** Labels are printed in Starshipit.
6. **WMS confirms shipment** and finalises stock movements.

With automatic order events enabled, WMS also stays in sync when an order is edited, cancelled or shipped in Starshipit. Check these controls under **System > Settings > WMS Integration**. If **Send order events to WMS** is off, use manual **Send to WMS** instead.

To import one existing store order, first check which stage is missing. If it is not yet in Starshipit, use the source integration's [single-order import](/articles/206705193-import-orders#import-one-order-from-an-integration). If it is already in Starshipit, check the WMS integration controls above, or use **Send to WMS** when automatic order events are off. **Create Order** and **Import CSV** create orders; avoid making a manual or CSV copy of an existing source order to troubleshoot its import.

:::note
Orders typically appear in WMS within a few seconds of being created or updated in Starshipit.
:::

## Order statuses

| Status | What it means |
|---|---|
| **Pending** | Order has arrived in WMS and is awaiting release to the warehouse. |
| **Released** | Order has been released; stock is allocated and pick jobs are created. |
| **Partially Shipped** | Some items have shipped; others are still outstanding. |
| **Shipped** | Order has been fully shipped. |

For a **Partially Shipped** order, expand its row and check **Outstanding items** for the shipped and remaining quantities by SKU. Select **Show all … outstanding SKUs** if the list is longer than five items. If WMS reports **Shipment quantities unavailable**, check the shipment details in Starshipit before deciding what remains to fulfil.

## Orders dashboard

The orders dashboard gives you a live view of everything in the fulfilment queue:

* **Status filters** - filter by one or more statuses at once (e.g. show Pending and Released together).
* **Insufficient inventory warning** - orders where stock is short are flagged with a warning icon so you can identify and act on shortfalls immediately.
* **Allocatable-only filter** - shows only orders that can be fulfilled right now, hiding anything blocked by stock shortfalls.
* **SLA and address signals** - show order service-level timing and Starshipit address validation details where available.
* **Select all** - applies to your currently filtered results only, so bulk actions only affect the orders you can see.
* **Put on hold** - pause release, packing and shipping, with picking blocked by default.
* **Order tagging** - bulk-apply Starshipit tags to selected orders directly from WMS.
* **Archive or delete actions** - remove orders from active Starshipit order views when your workflow calls for cleanup.
* **Order barcode printing** - print one sales-order-number barcode from a row action or labels for up to 100 selected orders.
* **Order detail view** - open any order to see a full timeline of events, stock movements, and processing history.
* **Merged-order history** - expand an order that Starshipit created by merging several orders to see the original order numbers.
* **Order editing** - correct the receiver address on eligible Pending or Released orders. Products and quantities can be changed only while Pending.

You can create a manual order in WMS when a warehouse team needs to process one order that did not arrive through the usual ecommerce flow. Use the CSV import when you need to submit several orders together.

![The WMS orders dashboard showing pending and released orders, allocation readiness and fulfilment actions](/uploads/articles/starshipit-wms/web/outbound-fulfilment/orders-dashboard.jpg)

## Save and reuse an Orders view

Use the **Select view** dropdown on the Orders dashboard to reuse saved filters and searches. To save a view, you need permission to manage fulfilment.

WMS saves the current tab, warehouse filters and search with the shared Orders view. For example, save Pending orders with an allocatable-only filter to reuse that warehouse queue. Shipping can open the same view, but applies only its shared filters; warehouse-only criteria do not restrict Shipping results.

1. Apply the filters or search you want to reuse.
2. Open **Select view** and select **Save current view**.
3. Name the view, review any notice about filters that cannot be saved, and select **Save view**.
4. Select the saved name from the dropdown to apply it again.

Confirm the expected tab, filters and matching orders after applying a view. If WMS blocks a tab change to protect saved criteria, clear or change the incompatible filters before switching.

**Clear selection** deselects the active view and resets its filters; it does not delete the saved view. To remove a view, select the trash icon beside its name and confirm **Delete view**. This removes the saved view from both WMS and Shipping while leaving your current order filters applied.

## Prepare an order

Use [CSV import](/articles/14700000000098-import-wms-orders-from-csv) for orders without a connected source. Before release, [review the address and edit eligible order details](/articles/14700000000086-edit-wms-orders-and-resolve-addresses). To pause or remove active outbound work, [use a hold or Undo release](/articles/14700000000087-hold-wms-orders-or-undo-release).

## Releasing orders

Orders start as **Pending** and are not allocated to warehouse jobs until you release them. This gives you control over when your warehouse starts working on each order.

### Release a single order

1. Open the **Orders** dashboard.
2. Select a **Pending** order.
3. Click **Release to Pick**.

WMS checks available inventory, allocates stock, and creates a pick job.

To skip the standard pick job, use **Release to Pack** to prepare ready packing work, or **Pack Now** to start packing immediately. See [expedited fulfilment](/articles/14700000000013-use-pack-now-and-batch-pack-now#release-to-pack) for prerequisites and steps.

### Release orders in bulk

Use the checkboxes to select multiple orders, then choose **Release selected**. The **allocatable-only filter** is useful here - apply it first so you're only releasing orders that actually have stock.

Bulk release is ideal for end-of-day waves, courier cut-off runs, or batches grouped by sales channel.

## How WMS allocates stock

When you release an order, WMS automatically reserves the right stock for each line item. This is called **allocation**.

WMS follows the rules configured on each product to decide what to reserve:

* Automatic allocation uses eligible **Cross-dock** and **Pick Face** stock, prioritising Cross-dock locations. If there is not enough eligible stock, replenish before automatic release.
* When manually selecting inventory for an order, you can also choose eligible **bulk storage** stock. WMS uses only the bulk inventory you explicitly select; it does not automatically fall back to other bulk stock.
* For batch or serial tracked products, allocation locks in the specific batch or serial number.
* The allocation strategy (FIFO, FEFO, etc.) on each product determines which units are reserved when multiple options exist.

See [Products and inventory configuration](/articles/14700000000006-configure-wms-products-and-inventory) for how to configure these rules, and [Replenishment](/articles/14700000000016-replenish-pick-faces) for how pick face restocking works.

Use the allocations view to inspect the exact product, location, batch, quantity, order and job behind each active reservation.

![The allocations view showing reserved stock by product, location, order and job](/uploads/articles/starshipit-wms/web/outbound-fulfilment/allocations.jpg)

### When an order can't be fully allocated

If there isn't enough stock, WMS flags the order with a warning rather than processing it silently. Your options:

* Wait for incoming stock (visible on your inventory dashboard when a purchase order is in progress).
* Edit an eligible **Pending** order in WMS to adjust or substitute items. For a **Released** order, use **Undo Release** before changing items.
* Partially ship what's available if your workflow supports it.

Expand the Pending order to review the shortage by SKU. WMS can show the required quantity, the shortfall, pickable stock, earlier pending demand, stock held outside pick faces, and related putaway or replenishment work. Links to product inventory and jobs appear only when your role can open those pages. Use this evidence to decide whether to replenish, finish open warehouse work, wait for incoming stock, or change the order.

## Batch and wave workflows

WMS supports releasing and picking orders in batches - grouping multiple orders into a single run to reduce walking time and speed up fulfilment. These workflows are covered in the [Picking](/articles/14700000000011-pick-orders-in-wms) and [Expedited fulfilment](/articles/14700000000013-use-pack-now-and-batch-pack-now) guides.

## Routed orders

If your business uses parent and child Starshipit accounts, WMS can help route orders to the right fulfilment location:

* **Automatic routing** assigns eligible imported parent orders to configured child stores.
* **Manual routed-order actions** let authorised users reject pending routed orders or release them back to the parent pool.
* **Store priority and availability** control which stores participate in routing and which store should be preferred first.

Use routing when multiple stores or warehouses share order demand and you want WMS to help decide where an order should be fulfilled. If a store is temporarily unavailable, mark it unavailable instead of removing it from your routing setup.

## Continue fulfilment or handle a change

After release, [pick the order](/articles/14700000000011-pick-orders-in-wms) and [pack and ship it](/articles/14700000000012-pack-and-ship-orders-in-wms). If the order changes, is cancelled or needs a refund, follow [the order-change workflow](/articles/14700000000060-manage-order-cancellations-refunds-and-returns-in-wms) before restoring stock or restarting warehouse work.

After shipping, [manifest the order and check shipment writeback](/articles/14700000000088-manifest-wms-orders-and-retry-shipment-writeback). For scannable order references, use [WMS barcode printing](/articles/14700000000070-print-wms-barcodes-and-create-label-templates).

## Verify allocation

Check the order status and allocations for the expected SKU, location and quantity. Confirm batch or serial selections where required. If stock is short, inspect the Pending order’s shortage details and related warehouse work before creating a correction or releasing again.

## Related articles

* [Pick orders in WMS](/articles/14700000000011-pick-orders-in-wms)
* [Pack and ship orders in WMS](/articles/14700000000012-pack-and-ship-orders-in-wms)
* [Replenish pick faces](/articles/14700000000016-replenish-pick-faces)
