# Receive stock against a purchase order
URL: https://support.starshipit.com/articles/14700000000008-receive-stock-against-a-purchase-order
Canonical: https://support.starshipit.com/articles/14700000000008-receive-stock-against-a-purchase-order
Markdown: https://support.starshipit.com/articles/14700000000008-receive-stock-against-a-purchase-order.md
Updated: 2026-11-08

> For the complete documentation index, see [llms.txt](https://support.starshipit.com/llms.txt).

> Receive purchase orders on desktop or mobile, including existing Cin7 Core supplier invoices, tracking details and partial PO deliveries.

**Receiving** is the process of recording what physically arrives from your suppliers and bringing it into WMS inventory. When you complete a receipt, WMS:

* Records the quantities, batch numbers, serial numbers or expiry dates (where applicable).
* Adds the stock to your chosen location.
* Updates **Incoming** and **On hand** figures on the inventory dashboard.
* Writes a stock movement record for full audit history.

Receiving is tied to a purchase order. This lets WMS compare what you ordered against what actually arrived, flagging shortages or over-deliveries.

## Before you start

* You need a purchase order with status **CREATED**, **ORDERED**, **IN_TRANSIT**, **ARRIVED** or **PARTIALLY_RECEIVED**. See [Suppliers and purchase orders](/articles/14700000000007-manage-suppliers-and-purchase-orders) if you have not yet created one.
* Know which location(s) you will receive into — a staging dock, Quality Control, or a final storage location.
* Review the **Over-Receiving Tolerance** and **Under-Receiving Tolerance** under **System > Settings > Receiving** before accepting a supplier over-delivery or closing a short purchase order. Use [Review receiving tolerances](#review-receiving-tolerances) below if the limits need changing.

## Review receiving tolerances

Review the limits before starting the receipt:

1. Open **System > Settings > Receiving**.
2. Check **Over-Receiving Tolerance** against the delivery you need to accept.
3. If you change the setting, wait for the save confirmation.
4. Reopen the settings and confirm the saved limit.

| Over-receiving option | What it allows |
| --- | --- |
| **Percentage** | Extra units up to the configured percentage above each ordered line quantity. `0%` prevents extra units. |
| **No limit** | Over-deliveries without a percentage cap. |

**Under-Receiving Tolerance** is checked when you deliberately close a short PO. Existing Cin7 Core supplier invoices use stricter rules: receive the selected invoice's full quantities in one submission, without partial or excess quantities.

## Starting a receiving session

**On desktop:**

1. Open a PO in one of the eligible statuses listed above, then select **Receive Goods**. You can also open **Receive goods** from the dashboard and select an eligible PO. You do not need to change an **ARRIVED** PO back to **CREATED** before receiving.
2. Review the list of PO lines and expected quantities.

**On mobile:**

1. Open **More > Receive PO** in the WMS mobile app.
2. Select the PO you want to receive against.
3. Select a PO line by searching or scanning a barcode.

For a Cin7 Core **Invoice First** purchase, select the supplier invoice before entering items. Follow [Receive an existing Cin7 Core invoice](#receive-an-existing-cin7-core-invoice) below.

## Entering received quantities

1. Select a PO line and enter the quantity that physically arrived. For ordinary PO receiving, this can be less than the ordered quantity.
2. Enter the tracking details required for that product.
3. Review the quantity before moving to the next line.

| Tracking type | Required details |
| --- | --- |
| **Standard** | Quantity received; no additional identifiers. |
| **Batch** | Quantity and batch or lot number. You can also record an expiry date. |
| **Serial** | Quantity and one serial number per unit. WMS warns if the quantity exceeds the number of serials entered. |

WMS validates the required tracking details before you can complete the receipt.

### Fill the remaining quantities

Use **Receive all remaining** to fill outstanding quantities for lines that are ready. Complete required batch or serial details first; the bulk action stays unavailable while those details are missing. You can still increase, decrease or enter each line's quantity manually.

The desktop receiving screen keeps the expected quantity, quantity being received, destination and tracking requirements together for each PO line.

![The desktop receiving screen for a purchase order with standard, batch and serial-tracked products](/uploads/articles/starshipit-wms/web/inbound/receiving-purchase-order.jpg)

:::note
Receiving drafts are saved while you work. When returning to a session, review its quantities before submitting, especially if another team member may have continued it.
:::

### Recording inbound cartons

When **Enable Cartons Received** is turned on under **System > Settings > Receiving**, you can record the number of inbound cartons delivered for the purchase order. This optional value is captured on the receipt and included in the **PO Receipt Report** CSV export, which is useful for reconciling freight invoices or tracking carton accuracy.

## Choosing a destination

Choose a destination for each line:

| Destination | Result |
| --- | --- |
| **Final storage location**, such as a pick face or bulk storage | Stock is added directly to that location. This is *direct putaway*; no separate putaway job is created. |
| **Staging dock** | WMS creates a putaway job to move the stock to final storage later. |
| **Quality Control location** | Stock is held for inspection and stays unavailable for picking. Create a putaway job when the approved products and quantities are ready for storage. |

The receiving screen shows the location marked as the default stocktake and receiving location. The default can be a **Pick Face**, **Bulk Storage**, **Staging/Receiving Dock**, or **Quality Control** location. You can select another available location for a line. If the wrong location is pre-selected, update the default on the location record before receiving again.

See [Putaway](/articles/14700000000009-put-away-received-stock) for how staged stock is moved to final locations.

## Complete desktop receiving

The final action depends on the selected destinations:

| Destination choice | Final action |
| --- | --- |
| Direct storage | **Complete Receiving** |
| Staging | **Unload to Staging** |
| Quality Control | **Receive to Quality Control** |
| Cross-dock | **Receive to Cross-Dock** |
| A mix of destinations | **Process Receiving** |

1. Review the received quantities, destinations and required batch or serial details.
2. Select the final action shown for your destinations.
3. Wait for receiving to complete.
4. Refresh the PO and **Inventory**.

Confirm the received quantities and locations match the delivery. If the result is uncertain, check the PO and Stock Movements before submitting the same delivery again.

## Receiving on mobile


The WMS mobile app supports full PO receiving from the warehouse floor, including barcode scanning for PO lines and locations:

1. Open **More > Receive PO**.
2. Select the PO.
3. Select the PO line (by search or barcode scan).
4. Select the receiving location.
5. Enter received quantity and any required tracking details (batch, serial, expiry).
6. If **Enable Cartons Received** is on, enter the cartons delivered.
7. Submit the receipt.

This gives the same result as desktop receiving, reducing paper and avoiding walk-backs to a workstation.

## Receive a Cin7 Core supplier invoice

For an eligible **Invoice First** purchase, [receive the existing Cin7 Core supplier invoice](/articles/14700000000091-receive-an-existing-cin7-core-supplier-invoice). That workflow requires a complete invoice receipt and has its own draft and recovery steps. **Stock First** purchases use the ordinary PO receiving flow.

## After receiving

Once a receipt is submitted:

* **Direct putaway**: Stock is recorded at the destination. Automatic order allocation uses eligible Pick Face and Cross-dock stock. Bulk Storage stock can be selected manually or replenished to a pick face.
* **Staged receiving**: Stock appears in the staging location. You will need to complete the putaway job before the stock is in a pick-face or bulk location available for picking.
* **Quality Control receiving**: Stock remains unavailable while it is inspected. Create and complete a putaway job to release approved stock into a pick face or bulk location.
* **Webhook notification**: If WMS webhooks are enabled, a stock-received event can be sent after receiving completes.

You can verify the receipt using:

* The **Inventory dashboard** — to see updated on-hand quantities.
* **Location view** — to confirm which products are at each location.
* **Stock movement logs** — to see the RECEIVE movement recorded against the PO.

## FAQ

<!-- faq:start -->

<!-- faq:question -->Do I have to receive against a purchase order?<!-- /faq:question -->

Using POs is strongly recommended. POs make it easier to reconcile ordered vs received quantities and keep Incoming figures accurate. If you receive ad-hoc stock without a PO, use a manual stock adjustment to bring it into inventory — but note this creates less traceability than a proper receipt.

<!-- faq:question -->What happens if I receive more than ordered?<!-- /faq:question -->

WMS records the extra quantity. You can decide whether to amend the PO to reflect the over-delivery or treat it as an unplanned receipt. The PO status will move to RECEIVED once you mark it as complete.

WMS prevents a line from exceeding its configured **Over-Receiving Tolerance**. Ask an admin to review **System > Settings > Receiving** if your warehouse needs to accept a larger supplier over-delivery.

For an existing Cin7 Core supplier invoice, WMS requires the exact invoice quantities. PO tolerance settings do not allow excess invoice quantities.

<!-- faq:question -->What happens if I receive less than ordered?<!-- /faq:question -->

The PO status stays **PARTIALLY_RECEIVED** until the remaining quantity arrives. If you deliberately mark the PO complete, WMS checks the **Under-Receiving Tolerance** against every line. A line below the allowed percentage remains open and WMS tells you the minimum quantity required. See [Suppliers and purchase orders](/articles/14700000000007-manage-suppliers-and-purchase-orders).

For a Cin7 Core **Invoice First** purchase, each selected invoice must be received in full. Separate invoices can cover separate deliveries on the same PO, but you cannot submit part of one invoice.

<!-- faq:question -->Can I receive without choosing a final location?<!-- /faq:question -->

Yes — receive into a **Staging Dock** location. WMS will create a putaway job so you can move stock to final locations later. This is useful for large or mixed deliveries where you want to log everything quickly and sort it afterwards.

<!-- faq:end -->
