# (Legacy) Set up the print client
URL: https://support.starshipit.com/articles/115003720583-legacy-set-up-the-print-client
Canonical: https://support.starshipit.com/articles/115003720583-legacy-set-up-the-print-client
Markdown: https://support.starshipit.com/articles/115003720583-legacy-set-up-the-print-client.md
Updated: 2026-05-07

> For the complete documentation index, see [llms.txt](https://support.starshipit.com/llms.txt).

> Step-by-step guide to setting up (legacy) the print client.

:::warning
**Windows users:** The Starshipit Desktop App now supports Print Client mode and replaces the standalone Print Client on Windows. Follow the [Print Client mode setup in the Desktop App](/articles/printing-labels-packing-slips/printing/set-up-desktop-print-application) instead.

The steps below apply to Mac users, or Windows users on older setups who are unable to upgrade.
:::

## 1. Download and install the Print Client for Windows

1. In your Starshipit account, select **Settings**, then select **Desktop App** (UI 2.0) or **Printing** (Classic UI).
2. Select the advanced tab, then select **Add new print settings** or **Settings** under a label type.
3. Now click **Download Print Client for Windows** or **Mac**.  
   1. For Windows: To install the setup file, follow the steps in the installation wizard.
   2. For Mac: Drag and drop the **Print Client** icon to the Applications Folder.

## 2. Connect the Print Client

1. Run the **Print Client** application on your computer.
2. Copy and paste the authorisation code from the page where you selected **Add new print settings** and selected your carrier name to create a Label Type in the very first step.

   ![Authorisation code location in Starshipit settings](/uploads/attachments/legacy-print-client-auth-code.png)

   ![Paste authorisation code in Print Client](/uploads/attachments/legacy-print-client-paste-auth.png)

3. Paste your authorisation code in the **Print Client** application.
4. Select the printer.
5. Open the **Print Client** from the system menu bar.
   1. For Mac users: You can find this in top right of your screen.
   2. For Windows users: It is in the system tray in the bottom right of your screen.

Make sure the connection is successful by checking the green **Online**status in the Print Client.

![print_client_connected.jpg](/uploads/articles/printing-labels-packing-slips/printing/legacy-set-up-the-print-client/image_360002138315.png)

## 3. Assign a label type to the Print Client

Assign a label type (in this example the "Packing Slip") to the computer where the Print Client is installed.

1. Go to **Settings**, select**Printing**, then select the **Advanced** tab.
2. Click **Add new print settings**.
3. Select the label type (e.g. Packing Slip).
4. Select the **Format**, and set **Print Client** as the **Print Method**.
5. Select the **Machine** that the Print Client is set to.
6. Click **Save**.

![mceclip0.png](/uploads/articles/printing-labels-packing-slips/printing/legacy-set-up-the-print-client/image_360004646835.png)

## 4. Assign a printer to the Print Client

1. Open the **Print Client** on your computer.
2. Go to the **Printers** Tab.
3. In the **Label Type**, select **Packing Slip**.
4. Select the **Printer Name** to print the Packing Slip e.g. Brother MFC-9140CDN.
5. Click **Assign**.

## 5. Check paper size and orientation

Check if the page parameter corresponds to the printer and the page loaded in the printer.

1. Click on the **Label Type** and **Printer Name**.
2. Check the Paper Size e.g. A4 for Packing Slip, and page orientation.
3. Click **Save Settings**.

![mceclip2.png](/uploads/articles/printing-labels-packing-slips/printing/legacy-set-up-the-print-client/image_360004646875.png)